快馬礦用車以公司MK70平臺打造,國內市場首創,填補該類礦用車產品市場的空白。采用行業內得到廣泛認可的玉柴發動機、法士特變速箱、車橋承載系統及舒適豪華的駕駛室。可用于冶金礦山、露天煤礦與鐵礦、水利水電工地、有色金屬礦山、建筑工地等場所的物料運輸設備。
采用卷繞電池,無需加注電解液。該電池壽命是普通電池的2-3倍,長達2年的質保壽命保證您放心使用。
440馬力發動機,合理的動力匹配,使該車擁有65km/h的車速,滿足在同一場地不同車型混用時,速度效率的優化匹配。裝載50T土方在8%的坡道上能達到15km/h,
U型斗結構,大大減輕整車整備質量,提高載重效率、增加運營效益。
駕駛室采用氣囊減震器,比彈簧減震效果更好,使駕駛更舒適。
MK Fleeting Mining Truck from mining truck MK70 (of ZSVM) as a platform, being the domestic pioneer to fill the niche of the same type of coal dumpers. It adopts YUCHAI engine, which is widely recognized within the domestic market; FASTRE gearbox, axle load system and comfortable/luxurious driver’s cab. It can be used to transport materials for metallurgic mines, open-air coal mines and iron ore mines, water conservancy/hydropower construction sites, non-ferrous metal mines, and construction sites.
Spiral-wound battery loaded on this mining truck requires no supplement of electrolyte. This battery is able to survive one or two times longer than ordinary batteries and the two-year warranty assures your proper use during this period.
Driven by a 440 HP engine, and matched with appropriate powertrain, this truck is able to go at a speed of 65km/h. Also, this truck is easy to coordinate with other vehicles on the same ground to maximize efficiency. Loading 50T earthworks, it is able to climb 8% ramp at 15km/h.
The U-type bucket which greatly reduces the curb weight can improve load efficiency and increase benefits.
The diver’s cabin is equipped with air bag shock absorbers which are more effective than spring shock absorbers, so as to provide a more comfortable drive.
MK50兩軸礦用車以公司MK70平臺打造,國內市場首創,填補該類礦用車產品市場的空白。采用行業內得到廣泛認可的玉柴發動機、法士特變速箱、車橋承載系統及舒適豪華的駕駛室。可用于冶金礦山、露天煤礦與鐵礦、水利水電工地、有色金屬礦山、建筑工地等場所的物料運輸設備。
Biaxal mining truck MK50 derives from mining truck MK70 (of ZSVM) as a platform, being the domestic pioneer to fill the niche of the same type of coal dumpers. It adopts YUCHAI engine, which is widely recognized within the domestic market; FASTRE gearbox, axle load system and comfortable/luxurious driver’s cab. It can be used to transport materials for metallurgic mines, open-air coal mines and iron ore mines, water conservancy/hydropower construction sites, non-ferrous metal mines, and construction sites, etc.
采集多家大型露天煤礦、鐵礦的使用環境,精心研發的短距離土石方、礦石轉運的專用車輛。高效節油的發動機,寬速比的變速箱,高承載的平衡懸架及車橋,帶管路預熱的供油系統,三級六次過濾的進氣系統,高強度的車廂,能夠配套大型挖掘機施工作業,單車裝載更多物料,減少礦區車輛運輸密度,運輸效率大大提高!
The special purpose vehicle is derived from the service environments of several large open-cut coal mine and foreign brands. Efficient & fuel-efficient engines, high-gear-ratio transmission, high load balance suspension and axle, oil-supply system with pipe-preheating, three-stage & six-passage air filtration system. High-strength bunker can operate with a large excavator and a single one of it can load more materials, thus reducing the density of mining vehicle transportation and greatly improving transport efficiency! The overall vehicle performance is tested following relevant national standards.
車輛型號 Model | MK60快馬 |
驅動形式 Driving Model | 6×4 |
軸 距 Wheel Base(mm) | 3625+1550 |
發動機型號 Engine | YC6MJ440L-T20 |
變速器 Gearbox | 10JSD220A |
車 橋 Axle | Front 13T Rear 25T |
輪胎規格 Tyre Size | 13.00 |
整車整備質量 Kerb Weight(kg) | 23000 |
允許最大總質量Payload Capacity(kg) | 60000 |
車廂內部尺寸Inside Body Size(mm) | 5600×3000×1500 |
整車外形尺寸 Vehicle Shape Size(mm) | 8350×3235×3830 |
最高車速 Max.Speed(km/h) | 65 |
最大爬坡度 Grade Ability(%) | 45 |
最小轉彎半徑 Min.Turning Radius(m) | 11 |
車廂舉升系統 Lifting System | MK Lifting System |
車輛型號 Model | MK50 |
驅動形式 Driving Model | 4×2 |
軸 距 Wheel Base(mm) | 4200 |
發動機型號 Engine | YC6MK340 YC6MK375 |
變速器 Gearbox | 10JSD160A 9JSD180A |
車 橋 Axle | Front 18T Rear 35T |
輪胎規格 Tyre Size | 14.00 |
整車整備質量 Kerb Weight(kg) | 17500 |
允許最大總質量Payload Capacity(kg) | 50000 |
車廂內部尺寸Inside Body Size(mm) | 4800×3000×1600 |
整車外形尺寸 Vehicle Shape Size(mm) | 7580×3280×3850 |
最高車速 Max.Speed(km/h) | 49 |
最大爬坡度 Grade Ability(%) | 40 |
最小轉彎半徑 Min.Turning Radius(m) | 10.5 |
車廂舉升系統 Lifting System | MK lifting system |
Model | MK60 | MK70 | MK80 |
Driving Model | 6×4 | 6×4 | 6×4 |
Wheel Base(mm) | 3625+1550 | 3625+1550 | 3625+1550 |
Engine | YC6MK340 | YC6MK375 | YC6MJ-420 |
Gearbox | 10JSD160A | 12JSD180 | 9JSD220 |
Axle | Front 16T Rear 32T | Front 16T Rear 32T | Front 16T Rear 35T |
Tyre Size | 13.00 | 14.00 | 14.00 |
Kerb Weight(kg) | 23000 | 24000 | 26000 |
Payload Capacity(kg) | 60000 | 70000 | 80000 |
Inside Body Size(mm) | 5600×3000×1500 | 5600×3000×1600 | 5800×3100×1650 |
Vehicle Shape Size(mm) | 8320×3280×3850 | 8320×3280×3850 | 8570×3325×3850 |
Max.Speed(km/h) | 49 | 49 | 49 |
Grade Ability(%) | 40 | 40 | 40 |
Min.Turning Radius(m) | 11 | 11 | 11 |
Lifting System | MK lifting system | MK lifting system | MK lifting system |